
MAINTENANCE (Continued)
(_ AIR CLEANER (see Figure4):
NEVER RUN ENGINE WITHOUT COMPLETE AIR CLEANER
INSTALLED ON ENGINE.
Replace filteronce a year or mereoften ifused inextremely dusty
or dirty conditions.
DO NOT A'FFEMPT TO CLEAN OR OIL FILTER.
Replacementfilters ere available atany Sears Roebuckend Co.
(or Sears Canada, Inc.) Service Canter. To install new filter,
proceed as follows:
A. Turn cover to the left (counterclockwise)and remove if and
filter fromflange. Discard filler.
B. Clean cover and flange thoroughly.
C. Insert new filterinto cover.
D. Position cover and filter against flange with tab on cover
inserted Into lower left corner of slot in flange.
E., Push cover firmly against flange and turn it to the right
(clockwise)as far as it willgo. Be sure retainersare locked
around flange.
_fTT_RN COVER
CLOCKWISE)
TO REMOVE
SLOT
RETAINER
COVER
TAB
COVER
TO THE RIGHT
(CLOCIONISE)
TO TIGHTEN
MAINTENANCE (continued)
(_) SPARK PLUG (see Figure 5):
This spark ignitionsystemmeets all requirementsof the Cana-
dian Interference-CausingEquipmentRegulations. This engine
complies withallcurrentAustralianand New Zealand limitations
regarding electromagnetic interference.
Check spark plug yearly or every 100 operating hours.
A. Clean area aJ'oundspark plug.
B. Remove and inspectspark plug.
C. Replace sparkplugif electrodesare pitted,burnedor porce-
lain is cradxed. For replacementuseChampion RJ-19LM or
equivalent.
NOTE: A resistorsparkplug mustbe used for replacement.
D. Check electrodesgap with wirefeeler gauge and sat gap at
.030 if necessary.
E. Installspark plug,tightensecurely.
ELECTRODE_
.030IIGAP '_ _RCELAIN
F'_urefl
_) COOLING SYSTEM (see Rgure 1):
IMPORTANT: Frequentlyremove any grass clippings,dirt and
debrisfrom coolingfins,air intakescreenand leversand linkage
(see Figure 1).This willhelpensureadequatecoolingand correct
engine speed.
®
t
_ICHECK ENGINEAND EQUIPMENT NUTSJ
OFTEN FOR LOOSE
BOLTS AND ATrACHMENTS, AND KEEP THESE ITIEMS_
1 "lIGHTENED. |
Figure 4
Page 3 181-1191-11
Commenti su questo manuale